STRENGTH AND ELONGATION ANALYSIS OF POLYPROPYLENE COMPOSITE TOWARDS DIFFERENT MELTING TEMPERATURE SETTING ON THE INJECTION MOLDING MACHINE

Authors

  • Nur Syamimi Rusli Politeknik Port Dickson, Malaysia
  • Izyan Dayana Jonid Politeknik Ibrahim Sultan, Malaysia

Keywords:

Polypropylene composite, melting temperature setting, strength, elongation

Abstract

This paper reveals the strength and elongation analysis of Polypropylene composite towards different melting temperature settings on the injection molding machine. The operational melting temperature involved is between 250°C to 280°C. The Box-Behnken response surface methodology (RSM) was employed to identify the most significant melting temperature setting influencing the mechanical properties of Polypropylene composite, namely strength and elongation. A total of 17 experimental runs with three cycles of repetitions were conducted using the injection molding machine. Next, the strength and elongation of the Polypropylene composite is tested by using universal testing machine. Hence, the results were analyzed through Response Surface Methodology (RSM). From the result analysis, it was determined that the lowest melting temperature setting gave the highest tensile strength of the Polypropylene composite. There is an irregular trend for the elongation towards different melting temperature settings. The highest melting temperature setting resulted in the shortest elongation. The mid-range melting temperature caused the longest elongation. Meanwhile, the lowest melting temperature caused for shorter elongation. Therefore, RSM analysis can be utilized to identify the strength and elongation of the Polypropylene composite treated by different melting temperature settings.

Downloads

Published

30-11-2025

How to Cite

Rusli, N. S. ., & Jonid, I. D. . (2025). STRENGTH AND ELONGATION ANALYSIS OF POLYPROPYLENE COMPOSITE TOWARDS DIFFERENT MELTING TEMPERATURE SETTING ON THE INJECTION MOLDING MACHINE. SPSH 2025, 81–92. Retrieved from https://spsh.mypolycc.edu.my/proceedings/index.php/spsh2025/article/view/243

Issue

Section

Engineering, Industry 4.0, Smart Technologies & Security